Dealer Portal

MR 130 Zi EVO2

High-Impact Producer.

Kleemann’s MOBIREX MR 130 Zi EVO2 is a high-output mobile impact shredder that delivers unmatched economy and operational safety. This universally adaptable plant is perfectly suited for processing blasted natural stone, asphalt and demolition waste—producing a first-class product, every time Despite its relatively small crusher inlet size (52'' x 36'' / 1,300 x 900 mm), it delivers output rates that were only achievable with larger crushing plants in the past. Maximum input capacities of 496 US t /h (450 t/h) are easily attained. In primary screening, an independent double-deck pre-screen is applied.

Specifications

MR 130 Zi EVO2
Feed Capacity496 t/h
Drive ConceptDiesel-direct-electric drive
Crusher Inlet52in. x 36in.

Features

Optimized Material Flow
  • Each sectional component is wider than the last to allow material an unrestricted flow.
  • Higher performance with less fuel consumption.
  • Improved lifetime due to reduced wear.
Feeding Unit
  • Hydraulically operated hopper folding and locking system, for shortest set-up times and operation safety.
  • Additionally, secured with mechanical locking elements (also for hopper extension).
  • High wear-resistance due to side walls made of wear resistant steel.
Primary Screening
  • Independent vibrating double-deck pre-screen ensures effective screening of fines for optimal final grain quality.
  • Simple and safe replacement of screen mesh in upper and lower deck.
  • Reduction of bridging due to levelling of the feed material before the crusher.
  • Continuous Feed System (CFS)
  • Sensors measure the load on toggle and rotor.
  • Depending on the load, feeding chute and pre- screening frequencies are adapted automatically.
  • When the load in the crushing chamber is rebalanced, feeding continues without delay.
Crusher Unit
  • Optimized inlet geometry for improved entry of the material, thus increased throughput.
  • Reduced bridging in the crusher inlet by means of a hydraulic raising crusher inlet cover and upper impact toggle (controlled by radio remote control).
  • Effective overload protection with automated reset of gap setting of the impact toggles by sensor controlled hydraulic cylinder.

Brochures

Find a location
>
REQUEST A QUOTE
*
*
*
*
*
 
 
Send me email communications on rebates and special offers. I can opt out at any time.