Brandt Clean Up Buckets are designed for use in loose or previously excavated material. They are commonly used in bulk loading applications.
Specifications
| 44" SD |
| Weight | 360 lb |
| Length | 30.375 in |
| Width | 44 in |
| Height | 28.375 in |
| Capacity | 0.37 cu yd |
Features
- Designed with a large bucket opening while maintaining optimal tip radius. Optimal tip radius provides for superior bucket curling forces and stick power transfer to the bucket cutting edge.
- A full length tapered one piece side bar allows for a stronger bucket and helps reduce bucket wear. This design provides support from the base edge all the way to the top of the bucket for increased strength.
- Tapered side plates decrease bucket drag and reduce bucket wear by minimizing material contact with the sides of the bucket.
- Designed with a compound curved shell allows for the best clearance at the heel of the bucket which reduces wear. This also provides exceptional loading and unloading characteristics.
- Full length lateral wear bars are designed with high strength, abrasive resistant material and are spaced tighter at the heel of the bucket. This arrangement provides for superior wear reduction and increases the life of the bucket.
- Clean Up buckets include an engineered and load rated bucket lift eye.
- Inside corner gussets add reinforcement and increase bucket strength.
- Machined front and rear lug boss surfaces along with a machined wedge surface ensure perfect alignment with the mating quick coupler. The lugging is orientated so that superior engagement to the quick coupler is achieved at maximum bucket digging force.
- Base edge is designed with high strength, abrasive resistant material and is drilled to accept either a sloper or serrated bolt on cutting edge.
- Available in a full range of sizes.
Specifications
- High strength, abrasive resistant side bars and horizontal wear bars
- Reinforced upper corners
- High strength, abrasive resistant base edge for optional sloper or serrated bolt on cutting edge
- Machined coupler lugging
- Engineered bucket lift eye